Bins
Serie 130
Identification – atypical
Type of construction – cooled bin with cooled screw conveyer
CHARACTERISTICS AND APPLICATION:
Cooled bin with cooled screw conveyer was made acc. to a specific requirement for storage and transportation of a hot granulometric material in car tyre industry.
DIMENSIONS AND PARAMETERS:
Cooled bin with cooled screw conveyer was installed instead of an existing bin and a non-cooled screw conveyer. Outside dimensions had to be adapted to the real facility.
DESCRIPTION OF CONSTRUCTION:
The cooled bin is made from a stainless steel (class 17 acc. CZ-Standard ČSN) as a welded construction, with an interspace for cooling liquid. The liquid flow direction is guided in the interspace by means of screens welded in the interspace.
The bin consists of three parts:
- lower circular part / pos.1 /
- reducing piece / pos.3 /
- upper part of rectangular section / pos.2 /
The bin is equipped with screw couplings for input and output of cooling liquid, bleeder screwing and flanges for fixing of level indicators.
Cooled screw conveyer is made from a stainless steel (class 17 acc. CZ-Standard ČSN) as a welded construction. Trough incl. input part pos. 1 is made with interspace for cooling liquid. The liquid flow direction is guided in the interspace by means of screens welded in the interspace.
Upper part of the screw trough is covered with opening covers pos.2, made from a normal steel (class 11 acc. CZ-Standard ČSN). The screw conveyer is equipped with screw couplings for input and output of cooling liquid and bleeder screwing.
Screw shaft and bearing bodies are made from a normal steel (class 11 acc. CZ-Standard ČSN), too.
The gear box was used of existing screw conveyer.
A special type of construction and special requirements must be consulted supplier !!!
Photos
Files to download
