Roll branching chutes, pneumatic
Serie 55
Idencification – VKKP
Type of construction – pneumatic
CHARACTERISTICS AND APPLICATION :
Roll branching chutes serve to rerouting of material flow into several technological branches, where it is necessary to use local electric- or remote electric- control. They are used for powdered and fine granular materials. It is intended for materials with grain size max. 30 mm (It is necessary to respect the clear opening size). These equipments are designed first of all for ground and powdered materials and it is dustproof. Temperature of transported material can be from –30°C to +100°C, at powdered materials, which have humidity max. 1%, is allowable temperature within 0 – 100°C. At granular materials with clay content, which have humidity max. 3% is working temperature from 0° to 100°C.
DIMENSIONS AND PARAMETERS :
Type range of roll branching chutes VKKP is designed in 8 sizes < 150 x 150 mm up to 650 x 650 mm >, ( s. tablet – project data sheet ). On the basis of technical-business discussion it is possible to order a special type of construction. The operating is ensured by means rotating pneumatic drive with nominal sizes Ř 63 – 150 mm at usual working pressure 0,6 Mpa. Supplied roll branching chutes have pneumatic components from prestigious producers. These components are designed by producer, alternatively acc. to order or agreement with customer.
DESCRIPTION OF CONSTRUCTION :
Roll branching chutes are designed to mounting to the gravitational chute. These chutes have square or rectangular cross section, that are intended to regulation of material flow into two technological branches. Operating is executed by means of pneumatic drives with corresponding twist moment. hand- and remote- controlled distributors and valves are included in scope of delivery. It is ensured an end position-signalling. Outlet flanches form an angle 60° from horizontal plane.
Construction – the body of roll branching chute has welded construction. This construction has an inlet flange and two outlet square flanges. The flow regulation of transported material ensures an inside roll. This roll has clear opening with armoured slide surface. This roll is fixed through journals into self-lubricating sleeves. It is placed on outside chute-covers. Inside roll, journal placing and outside covers have seals, which serve to dustiness prevention.
A special type of construction and special requirements must be consulted with supplier!!!
Photos
Files to download
